Company Details

  • Chengdu XingXingRong Communication Technology Co.,Ltd

  •  [Sichuan,China]
  • Business Type:Manufacturer , Trade Company
  • Main Mark: Americas , Asia , Europe , Middle East , West Europe , Worldwide
  • Exporter:21% - 30%
  • Certs:ISO9001, CE
  • Description:Drop Cable Splicing Protective Box,Fiber Protective Case,Fiber Pigtail Splice Site Protection
Inquiry Basket ( 0 )

Chengdu XingXingRong Communication Technology Co.,Ltd

Drop Cable Splicing Protective Box,Fiber Protective Case,Fiber Pigtail Splice Site Protection

Home > Products > FTTH Components > Other Ftth Components > Optical Fiber Splices Protective Box

Optical Fiber Splices Protective Box

Share to:  
    Payment Type: L/C,T/T,D/P,Paypal
    Incoterm: FOB,CIF,DDP
    Min. Order: 500 Piece/Pieces
    Delivery Time: 15 Days

Basic Info

Model No.: FOPB-9

Material: ABS Flame Retardant Material

Flame Retardant Grade: V0

Tensile Resistance: ≤6 KG

Additional Info

Packaging: Carton Pack

Productivity: 1000000

Brand: XXR

Transportation: Ocean,Air

Place of Origin: China

HS Code: 85367000

Port: Shenzhen,Ningbo,Shanghai

Product Description

Optical Fiber Splices Protective Box is also named as fiber protective case is specially designed for protecting the splicing fibers of FTTH Drop Cables at the dimension of 2.0mm*3.0mm. FTTH Drop Cables are spliced and protected by the fiber splice protective sleeve. Then put the spliced FTTH Drop Cables and Heat Shrink fiber splice protective sleeve into This Drop Cable Splicing Protective Box. At last, install FTTH Drop Cable Splicing Protective Box onto the wall or into Optical Distribution Box. This fiber protective case is FTTH fiber to the home and other covered wire dedicated fiber splice protection tube, applies to the following 6CM length covered wire shrink tube splice protection for the covered wire welding machine dedicated, can covered wire to drop cable, Drop cable Heat Shrink Tubing for fiber pigtail splice site protection.


Features

Small size and good appearance

Smooth body and convenient installation

Mainly used as the protection between cables or pigtails

The reliable protection for splicing point avoids any breaking caused by external forces

Technical Data


Operation Environment

Temperature: -25℃~+65℃

Atmospheric Pressure: 70Kpa~106Kpa


Product Appearance

Without any defects that may affect the performance of the product, and the plastic shell injection smooth, no angle.


vibration: 10Hz, sinusoidal vibration;

Amplitude: 3 mm (6 mm, peak to trough);

Clamp Distance: 10 times diameter (minimum 250 mm); time: 2 hours

The residual fiber attenuation at 1550nm should be less than 0.03dB;


Torsion

Torque: The maximum torque of 25 nm or the maximum torsion angle of 90 degrees;

Torque position: 100 mm distance optical cable terminal;

Cycles: 5 cycles each protection box.

The residual fiber attenuation at 1550nm should be less than 0.03dB.


Torsion

Test method: GB/T 7424 2 E7;

Torsion length: 1m;

Reversed: 20 times;

Torsion angle: + 180 degrees;

Tension load: 20N;

Acceptance requirements: sheath should be visually free of any damage and cracking can be seen; after the test, the residual fiber attenuation at 1550nm should be less than 0.03dB.

ftth drop cable protetion box1 ftth drop cable protetion box 2ftth drop cable protetion box 3

fiber pigtail splice site protection boxfiber protective case

Fiber Optical Splice Box


FAQ

1.When can I get the price?
We usually quote within 48 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2.How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
3.How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 2-4 days. The samples will be sent to you via express and arrive in 4-8 days. You can use your own express account or prepay us if you do not have an account.
4.What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. Generally speaking, production lead time is within 2~4 weeks.
5.What is your terms of delivery?
We accept EXW, FOB, CIF, DDU, DDP etc. You can choose the one which is the most convenient or cost effective for you.
6.Terms of payment?
We accept payment as the following.
1).30% T/T deposit, 70% balance before delivery.
2).100% TT in advance.
3).western union


Looking for ideal Drop Cable Splicing Protective Box Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Fiber Protective Case are quality guaranteed. We are China Origin Factory of Fiber Pigtail Splice Site Protection. If you have any question, please feel free to contact us.

Product Categories : FTTH Components > Other Ftth Components

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Yuki Ms. Yuki
What can I do for you?
Chat Now Contact Supplier