Chengdu XingXingRong Communication Technology Co.,Ltd
Model No.: FOPB-8
Type: Fiber Optic Connectors
Material: ABS Flame Retardant Material
Flame Retardant Grade: V0
Tensile Resistance: ≤6 KG
Packaging: Carton Pack
Place of Origin: China
HS Code: 85367000
This Type Single Splice Protection box is also named butterfly fiber optic cable protection box, it is one type of FTTH Drop Cable Splicing Protective Box. FTTH Drop Cable Splicing Protective Box is specially designed for protecting the splicing fibers of FTTH Drop Cables at the dimension of 2.0mm*3.0mm. It is a case to put in a butterfly cable with a thermal protection tube after hot melting, so that the splice spot can get a better protection to protect fiber splice tray, Relative to the cold welding, the hot one can improve the optical performance of connector, make the effective connection rate increased to one hundred percent, prolong the service life of the product and lower maintenance costs.
Small size and good appearance
Smooth body and convenient installation
Mainly used as the protection between cables or pigtails
The reliable protection for splicing point avoids any breaking caused by external forcesTechnical Data
Atmospheric Pressure: 70Kpa~106Kpa
Without any defects that may affect the performance of the product, and the plastic shell injection smooth, no angle.
vibration: 10Hz, sinusoidal vibration;
Amplitude: 3 mm (6 mm, peak to trough);
Clamp Distance: 10 times diameter (minimum 250 mm); time: 2 hours
The residual fiber attenuation at 1550nm should be less than 0.03dB;
Torque: The maximum torque of 25 nm or the maximum torsion angle of 90 degrees;
Torque position: 100 mm distance optical cable terminal;
Cycles: 5 cycles each protection box.
The residual fiber attenuation at 1550nm should be less than 0.03dB.
Test method: GB/T 7424 2 E7;
Torsion length: 1m;
Reversed: 20 times;
Torsion angle: + 180 degrees;
Tension load: 20N;
Acceptance requirements: sheath should be visually free of any damage and cracking can be seen; after the test, the residual fiber attenuation at 1550nm should be less than 0.03dB.
1.When can I get the price?
We usually quote within 48 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2.How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
3.How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 2-4 days. The samples will be sent to you via express and arrive in 4-8 days. You can use your own express account or prepay us if you do not have an account.
4.What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. Generally speaking, production lead time is within 2~4 weeks.
5.What is your terms of delivery?
We accept EXW, FOB, CIF, DDU, DDP etc. You can choose the one which is the most convenient or cost effective for you.
6.Terms of payment?
We accept payment as the following.
1).30% T/T deposit, 70% balance before delivery.
2).100% TT in advance.