Chengdu XingXingRong Communication Technology Co.,Ltd
Model No.: FOSP-HSS-31
Outer Tube Material: EVA
Inner Tube Material: EVA
Shrinking Temperature Range: 90 °C
Working Temperature: 60-120 °C
Standard Color: Clear
Needle Material: Ceramic Rod Quartz Rod
Place of Origin: Chengdu Sichuan
HS Code: 85189000
Mass Fiber Optics Heat Shrink Sleeves means there are several cores for the fiber. So the mass sleeve includes 4cores, 6cores, 8cores, 12 cores (for types). The sleeves we produce offer full protections the fiber optic splices. They do not cause additional insert losses, and they offer protection against mechanical damage, pollution and weather conditions. The single type fiber optic sleeve is used for the single-fiber, and the mass type fiber optic sleeve is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the fiber optic ceramic reinforcement member to realize the function.
Optic fiber heat shrinkable sleeves is used to protect the fiber optic joints. Move the Heat Shrink sleeves to the fiber optic connector, let the melting point of the heat shrinkable sleeves in the middle, gently straighten the fiber connector, put into the heater and heating. The EVA inner tube is melted, and the polyethylene pipe is tightly sleeved on the connecting optic fiber after shrinking. Since there is a stainless steel rod in the tube, it not only increases the tensile strength (1000~2300g). At the same time, can protective the fiber from being bending.
Consist of cross-linked polyfin, hot fusion tubing and ceramic
Keep optical transmission performance of optical fiber
Provide safe protection to optical fiber splicing
Easily use and avoid and damage to the optical fiber during installation
Sealing structure provides good performance to the splicing in the environment with temperature and humidity
Mainly used in fiber optic closures, fiber optic terminal boxes, ODF boxes, broadband network boxes, cable junction boxes ect. For communication products welding, special designed for FTTH project.