Chengdu XingXingRong Communication Technology Co.,Ltd
Model No.: FOSP-HSS-28
Outer Tube Material: Polyolefin
Inner Tube Material: EVA
Shrinking Temperature Range: 90 °C
Working Temperature: 60-120 °C
Standard Color: Clear
Needle Material: Ceramic Rod Quartz Rod
Place of Origin: Chengdu Sichuan
HS Code: 85189000
How a fiber optic sleeve works? Ribbon Mass Fiber Optic Fusion Splice Sleeve is one type of fiber optic sleeves, is used for the ribbon fiber. This sleeve is via the ceramic reinforcement member to realize the function. Mass means there are several cores for the fiber. So the mass sleeve includes 4 cores, 6 cores, 8 cores, 12 cores (four types). They enable to secure up to twelve fibers in one sleeve. Excellent climatic and thermal properties make it ideal for use in closed as well as open spaces. The main goals during design phase were: full protective to the fiber optic splices and quickness of assembly. Initial shrinking of the sleeve was taken into account during the production process to reduce the gap between the tubes. This protects the internal tube and ceramic strengthening element from falling out. The sleeves we produce offer full protections the fiber optic splices. They do not cause additional insert losses, and they offer protection against mechanical damage, pollution and weather conditions.
Optic fiber heat shrinkable sleeves is used to protect the fiber optic joints. Move the Heat Shrink Sleeves to the fiber optic connector, let the melting point of the heat shrinkable sleeves in the middle, gently straighten the fiber connector, put into the heater and heating. The EVA inner tube is melted, and the polyethylene pipe is tightly sleeved on the connecting optic fiber after shrinking. Since there is a stainless steel rod in the tube, it not only increases the tensile strength (1000~2300g). At the same time, can protective the fiber from being bending.
Consist of cross-linked polyfin, hot fusion tubing and ceramic
Keep optical transmission performance of optical fiber
Provide safe protection to optical fiber splicing
Easily use and avoid and damage to the optical fiber during installation
Sealing structure provides good performance to the splicing in the environment with temperature and humidity
Mainly used in fiber optic closures, fiber optic terminal boxes, ODF boxes, broadband network boxes, cable junction boxes ect. For communication products welding, special designed for FTTH project.